• Sciences de l'ingénieur/Mécanique/Mécanique des matériaux
  
• Sciences de l'ingénieur/Génie civil/Dynamique, vibrations
  
• Sciences de l'Homme et Société/Education
  
• Sciences de l'environnement/Environnement et Société
  
• Sciences de l'ingénieur/Matériaux
  
• Sciences de l'ingénieur/Génie civil
  
• Sciences de l'ingénieur/Génie civil/Eco-conception
  
• Physique/Mécanique/Mécanique des matériaux
  
• Sciences de l'ingénieur
  
• Chimie
  
• Sciences du Vivant
  
• Sciences de l'ingénieur/Mécanique/Mécanique des solides
  
• Sciences de l'ingénieur/Mécanique/Mécanique des structures
  
• Sciences de l'ingénieur/Génie civil/Construction durable
  
• Physique/Mécanique/Mécanique des solides
  
• Physique/Mécanique/Mécanique des structures
  
• Sciences de l'ingénieur/Mécanique/Matériaux et structures en mécanique
  
• Physique/Mécanique/Matériaux et structures en mécanique
  
• Sciences de l'ingénieur/Mécanique/Biomécanique
  
• Physique/Mécanique/Biomécanique
  
• Sciences du Vivant/Biologie végétale
  
• Sciences de l'ingénieur/Mécanique
  
• Sciences de l'ingénieur/Acoustique
  
• Sciences de l'ingénieur/Mécanique/Thermique
  
• Sciences de l'ingénieur/Mécanique/Vibrations
  
• Chimie/Matériaux
  
• Sciences du Vivant/Sciences agricoles/Sylviculture, foresterie
  
• Sciences du Vivant/Biologie végétale/Botanique
  

Spruce wood specimens were treated under mild temperatures 130°C and 150°C and different relative humidity from 0% to 25%. EMC reduced significantly for all the treatments. Weight loss (WL) increased insignificantly while the colour parameter, L*, decreased dramatically. Tanδ reduced significantly while the E/d has increased. After reconditioning, the partially reversibility has been achieved for EMC, tanδ and E/d. But, still an irreversible changes remains, which suggested being due to the chemical changes in wood polymers. While reversible changes has been resulted from the annealing of amorphous polymers. Since, the mild hygrothermal treatment applied to the specimens coincided with no significant WL, there was no obvious damage in wood structure while the irreversible changes present an improvement in vibrational properties by decrease in damping (tanδ), which could be due to the intermediate relative humidity of the treatment.

For most wood-based product uses it is essential to remove a large part of the water content from wet or green (fresh-cut) wood, to reduce further dimensional variations under varying humidity conditions, improve its mechanical characteristics, and protect it from biological attacks. However, the internal mechanisms of drying are not fully described. Here we observe drying at different scales using macroscopic measurements (weighing), nuclear magnetic resonance measurements allowing to distinguish bound- and free-water contents, and x-ray computed tomography images of air-liquid interfaces at the smallest pore scale (wood lumens). We show that during wood drying, even well above the fiber saturation point, bound water diffusion in cell walls (instead of capillary effects) ensures the extraction of liquid water from pores and its transport towards the surface of evaporation, and thus controls the drying rate. The distribution of bound-water content (uniform or heterogeneous) along the main sample axis and the drying-rate evolution depend on the competition between the external conditions and a characteristic rate of transport due to bound-water diffusion. For sufficiently slow drying this distribution remains homogenous until free water is fully extracted. An original physical phenomenon is thus at work, which plays a major role in regulating water extraction, in that it maintains a constant drying rate and a homogeneous distribution of the (mean) water content throughout the material. These results provide sound concepts for modeling and controlling drying properties of wood materials. They open the way to the understanding or control of the properties of many other materials containing two water types in food or civil-engineering applications. Our results complete recent observations that bound-water diffusion also controls imbibition in hardwood and finally show that transfers between bound and free water play a major role in the interaction of plantlike systems with water.